LM1500 Specifications

PERFORMANCE AT ISO CONDITIONS, SINGLE STAGE PTExhaust Flow, lbs/sec				                 160Power Turbine Exhaust Temperature, OF	740Generator Output, MWe 				         8-9.5Heat Rate, BTU(LHV) / kW.hr                                13,400
FUEL REQUIREMENTS - GAS TURBINENatural Gas						                  175 psi pressure; ISO flow 3.25 MMSCFD#2 Diesel						                          650 psi pressure; ISO flow 15 GPM
TURBINE & GEARBOX / GENERATOR SKIDSTurbine Skid	                                                          Pre-assembled & pre-wired, incl. gas & fire detection 
                                                                                           / suppressionGenerator/gearbox skid	                                          Pre-assembled & pre-wired, incl. fire detection / 
                                                                                          suppression
GENERATORManufacturer						                  Ideal Electric or equivalentType							                          Horizontal, air cooledRated	                                                                          12500 KVA, 60Hz, 1800 RPM, 12470V-13800VEfficiency						                          0.8 PF, 97.3%Output Power						                  10 MW (Peaks to 11.5 MW minus losses)Excitation						                          Brushless Exciter-RegulatorLube Oil System				                          Separate Integrated Lube System

LM6000 Specifications

GE LM6000PC IHI Gas Turbine Generator Package
	Turbine	Rating/Description/InformationOutput	45 MW ISO (site specific performance estimates can be provided)Manufacturer Package	IHI JapanManufacturer Gas Turbine	General ElectricModel Number	GE 7LM6000-PC-NGWG18Engine Hours	18000 494 approximateEngine Hours	18000Starts	Date of Last Major Maintenance	2023- Service BulletinOther Critical Events	March 2012 remove lease engine and Engine SN 191-494, Zero fired hours on engineEngine Type	PC Water injection onlyFuel Configuration	Natural Gas Only
Generator	Manufacturer	EM GeneratorModel Number	Serial Number	188180201Rated Output	45,765 kVARated Voltage	13.8 kVRated Current	1,915 AmpsPower Factor	0.85Frequency	60 HzCooling Type	Air CooledDate of Last Major Maintenance	January 2025 Rotor Rewind
Other Auxiliaries	Fuel System	Natural Gas.Water Injection System, 25 ppmTurbine Lube Oil System	Synthetic LO system with tank and skid mounted auxiliariesGen. Lube Oil	System Mineral LO system with tank and skid mounted auxiliariesControl System	CitecFire-Extinguishing System	Halon System including cylinders, nozzles; flame and gas detectors.GT Water Wash System	Water Washing unit: solutions tank; rinse water tank; electric heater, One On/Off line wash systemStarting System	Hydraulic starter on AGB, variable displacement type with an over-running clutch.	Shin  Nippon Steam Turbine	Output	10.5 MW ISO (site specific performance estimates can be provided)Manufacturer	Shin NipponModel Number	C8-R13-ARSerial Number	17712Turbine Hours	Date of Last Major Maintenance	Jan 2015 Overhauled replaced 13th stage bladesOther Critical Events		Generator	Manufacturer	Shinko Brushless AC GeneratorModel Number	CEI-7E-95076Type TK7L-AF-1550Serial Number	Rated Output	10,500 KWRated Voltage	13.8 kVRated Current	517 AmpsPower Factor	0.85Frequency	60 HzCooling Type	Air Cooled JC8Date of Last Major Maintenance	5/21/10 Generator Rotor was removed, repaired, and reinstalled12/17/08 Generator was restacked and Rewound	

DFC300MA Specifications

PERFORMANCE
Gross Power OutputPower @ Plant Rating 		        300 kWStandard Output AC voltage 	480 VStandard Frequency 		        60 HzOptional Output AC Voltages 	460, 440, 420, 400, 380 VOptional Output Frequency 	        50 Hz
EfficiencyLHV 				                        47 +/- 2 %Available HeatExhaust Temperature 		        700 +/- 50 ºFExhaust Flow 			                3,950 lb/hAllowable Backpressure 		5 iwc
Heat Energy Available for Recovery(to 250 ºF) 			                        480,000 Btu/h(to 120 ºF) 			                        808,000 Btu/h
Fuel ConsumptionNatural gas (at 930 Btu/ft3) 	39 scfmHeat rate, LHV 			                7,260 Btu/kWh
Water ConsumptionAverage 			                        0.9 gpmPeak during WTS backflush 	10 gpm
Water DischargeAverage 			                        0.45 gpmPeak during WTS backflush 	10 gpm
Pollutant EmissionsNOx 			                                0.01 lb/MWhSOx 			                                0.0001 lb/MWhPM10 				                        0.00002 lb/MWh
Greenhouse Gas EmissionsCO2 				                        980 lb/MWhCO2 (with waste heat recovery) 	520-680 lb/MWh
Sound LevelStandard 			                        72 dB(A) at 10 feetOptional 			                        65 dB(A) at 10 feet
DIMENSIONSFront ViewA Overall Width 			       20.0 ftB Height of Air Intake Filter 		15.1 ftC Height of Exhaust Stack 		14.5 ftSide ViewD Overall Length 			        20.0 ftE Height of EBOP 			        15.1 ftF Height of Discharge Vent 		14.5 ft
WEIGHTSMechanical Balance of Plant 	27,000 lbElectrical Balance of Plant 		15,000 lbFuel Cell Module 			        35,000 lb

equipment specifications

LM1500 Specifications

PERFORMANCE AT ISO CONDITIONS, SINGLE STAGE PT

Exhaust Flow, lbs/sec 160

Power Turbine Exhaust Temperature, OF 740

Generator Output, MWe 8-9.5

Heat Rate, BTU(LHV) / kW.hr 13,400

FUEL REQUIREMENTS - GAS TURBINE

Natural Gas 175 psi pressure; ISO flow 3.25 MMSCFD

#2 Diesel 650 psi pressure; ISO flow 15 GPM

TURBINE & GEARBOX / GENERATOR SKIDS

Turbine Skid Pre-assembled & pre-wired, incl. gas & fire detection / suppression

Generator/gearbox skid Pre-assembled & pre-wired, incl. fire detection / suppression

GENERATOR

Manufacturer Ideal Electric or equivalent

Type Horizontal, air cooled

Rated 12500 KVA, 60Hz, 1800 RPM, 12470V-13800V

Efficiency 0.8 PF, 97.3%

Output Power 10 MW (Peaks to 11.5 MW minus losses)

Excitation Brushless Exciter-Regulator

Lube Oil System Separate Integrated Lube System

LM6000 Specifications

GE LM6000PC IHI Gas Turbine Generator Package

Turbine Rating/Description/Information

Output 45 MW ISO (site specific performance estimates can be provided)

Manufacturer Package IHI Japan

Manufacturer Gas Turbine General Electric

Model Number GE 7LM6000-PC-NGWG18

Engine Hours 18000 494 approximate

Engine Hours 18000

Starts

Date of Last Major Maintenance 2023- Service Bulletin

Other Critical Events March 2012 remove lease engine and Engine SN 191-494, Zero fired hours on engine

Engine Type PC Water injection only

Fuel Configuration Natural Gas Only

Generator

Manufacturer EM Generator

Model Number

Serial Number 188180201

Rated Output 45,765 kVA

Rated Voltage 13.8 kV

Rated Current 1,915 Amps

Power Factor 0.85

Frequency 60 Hz

Cooling Type Air Cooled

Date of Last Major Maintenance January 2025 Rotor Rewind

Other Auxiliaries

Fuel System Natural Gas.Water Injection System, 25 ppm

Turbine Lube Oil System Synthetic LO system with tank and skid mounted auxiliaries

Gen. Lube Oil System Mineral LO system with tank and skid mounted auxiliaries

Control System Citec

Fire-Extinguishing System Halon System including cylinders, nozzles; flame and gas detectors.

GT Water Wash System Water Washing unit: solutions tank; rinse water tank; electric heater, One On/Off line wash system

Starting System Hydraulic starter on AGB, variable displacement type with an over-running clutch.

Shin Nippon Steam Turbine

Output 10.5 MW ISO (site specific performance estimates can be provided)

Manufacturer Shin Nippon

Model Number C8-R13-AR

Serial Number 17712

Turbine Hours

Date of Last Major Maintenance Jan 2015 Overhauled replaced 13th stage blades

Other Critical Events

Generator

Manufacturer Shinko Brushless AC Generator

Model Number CEI-7E-95076Type TK7L-AF-1550

Serial Number

Rated Output 10,500 KW

Rated Voltage 13.8 kV

Rated Current 517 Amps

Power Factor 0.85

Frequency 60 Hz

Cooling Type Air Cooled JC8

Date of Last Major Maintenance 5/21/10 Generator Rotor was removed, repaired, and reinstalled

12/17/08 Generator was restacked and Rewound

DFC300MA Specifications

PERFORMANCE

Gross Power Output

Power @ Plant Rating 300 kW

Standard Output AC voltage 480 V

Standard Frequency 60 Hz